Showing posts with label sluban m38-b0555 tower crane. Show all posts
Showing posts with label sluban m38-b0555 tower crane. Show all posts

Saturday, November 26, 2016

Sluban M38-B0555 Not Lego Tower Crane Set Review - Part Two


Welcome back to my  review of the Sluban M38-B0555 Tower Crane building set.  In my previous post I looked at the minifigures, the utility truck and the four storey house that come with this set. Those were the appetizers.  Now we look at the giant tower crane that is the main course.

I'll be building the tower crane as per the provided instruction manual and snapping pics about every five steps or so.  After step 5, you can see the large base of the tower has been constructed using a lot of technic style pieces.  Most of the parts are black, with a smattering of yellow and light gray.

Here's the first set of supports affixed to the base in step 10.  Note that the foundation of the base stays in this position all the time.  It would have been cool if Sluban designed the legs to fold upwards for easy transport and space considerations when not in use.  Or what if you had an uneven surface?  If each of the legs could adjust to accommodate the terrain, that would be bonus.

A lot of progress has been achieved between steps 10 and 15.  We now have three mast sections of the main tower in place.  The yellow girders are secured to a continuous central shaft via technic axles and pins.   For extra support, there are some flexible struts to keep the tower at right angles to the base.   It is a good design, because I find that the yellow framework has a tendency to lift a little, even with the center shaft and struts.  I looked at some pictures of real tower cranes and they don't have the struts on the bottom.

The main tower assembly is completed after step 20.    This thing is high!  So I had to google "parts of a tower crane" to make sure I called the next few things correctly.

The next part we are building is the operator's cabin.  It will sit atop the slewing unit or turntable. We are on step 25 now.

The operator's cabin has room for a seat and levers for the minifigure to operate the crane.  Here is the winch handle set into place.  It will be used to control the hoisting rope and hook once we get the cord attached.

This is a look at the completed cabin after step 29.

The back door of the cabin is supposed to swivel open, but I discovered you can't easily open it, the way it's designed.


I swapped out the original 1x3 yellow brick, and replaced it with a 1x2 brick, a 1x1 brick with side stud and a round button piece.  Now I have a door handle that will let me open the door to the cabin.

The next parts I'm assembling is the crane runway or jib.  On the jib, there are two arms, the working arm (that's the long one), and the machinery arm that holds up the ballast or counterweight (that's the shorter one).  The Sluban instruction guide resets the step numbers for the crane arm assembly, so this is a picture after step 5.

Here's a look at the jib that will hold our counterweights.  Step 6.


Ok, so we have added the tower head or peak to the unit.  That provides support to the front and rear jib suspension rods.  Step 9.

Time to thread the cord and connect it to the crank at one end and the hook at the other end.


Not having a good go of it here.  While trying to attach the cord to the crank, the platform to which the cabin is attached to keeps coming off

Arghh.

Not sure if you can see from the instruction manual, but it's the pieces in the center blue box that keep unclutching from the square plate piece.  I added my own 1x2 tile and 2x3 plate piece to secure the cabin platform to the square plate, and that seemed to fix the issue.

Here's pictures of the assembled hook block (center) and trolley (right).   So getting back to the cord, you tie one end to the rotating crank then you tie it off at the end of the jib.  You then insert the trolley on the jib arm.   At this point the cord is situated between the jib arm and the trolley.  You pull the cord out  and down from the trolley.   Carefully, take off one side of the hook block and place the cord under the two pulley wheels, now snap the side of the hook block you previously removed back into place.


Here's a minifigure view of the tower crane.

Here's a closer look at the trolley and hook block with load attached.  The crank which the cord is attached will lower and raise the hook block, but you have to manually slide the trolley along the jib yourself.

Here's the rear view of the tower crane with counterweights attached.  I made my counterweight a bit bigger than the one provided with the set.

These were all the extra parts leftover from the set.  



The Sluban tower crane can carry a whole pallet of bricks no problem!   A new structure now looms high above the skyline of Lepin modular town.   Thanks for looking.

Oh, if you missed part one of the Sluban Tower Crane review, you can find it here.

Brand: Sluban
Series: Construction
Model:  M38-B0555 Tower Crane
Number of Pieces:  1461



Sunday, November 20, 2016

Sluban M38-B0555 Not Lego Tower Crane Set Review - Part One


Earlier in the month, I blogged about some Sluban sets I found on sale on Aliexpress.  Well, I decided to see if the deal was real or not, so I went ahead and bought some of the construction vehicles and the additionally the giant Tower Crane set.   This post will focus on set M38-B0555 which has 1461 pieces and consists of a slew of minifigures, a delivery truck, a four storey building and a huge crane.


I got the package about 3 weeks after I ordered it. The seller listed it as a gift with a value of $2, lol.


My package didn't come with a box, just an instruction manual, a bunch of plates and 23 bags of parts.

The back of the instruction manual shows you a picture of all the Sluban construction series.  I've got the dump truck and cement mixer coming.


The minifigures.


For those not familiar with Sluban building sets, the minifigures are not Lego compatible.  They have skinnier legs and arms, and smaller hands, torso and heads.  Here's a comparison of a Lego minifigure on the left and a Sluban minifigure on the right.

In this Tower Crane set, you get a total of eleven minifigures, five of them look to be construction workers.

We also get a few pedestrian minifigures.  It should be noted that every Sluban minifigure has a unique face, no two are alike.

Here's a bonus minifigure on a keychain.  The included brick tool is neat in that it looks like a crocodile.

Sluban's quality assurance is not so good, as I found a brick piece with a chunk missing from it.

The Delivery Truck.


Hey, let's see if we can get everyone into the truck that comes with the set.

Yup, I think that's everyone.


Ok, no more pictures please!

The people at Sluban are such masochists because all of the truck bricks were spread amongst the twenty three bags.  There didn't seem to be any order in how the  parts were packaged. In another case I had to look for the same part (1x2 tan plates) in several different bags.  As a result, I had to rip open and empty all of the bags and spend a few hours just sorting the parts.

Here's that defective plate that makes up a corner part of the truck.  I found the Sluban bricks to be slightly softer than Lego or Lepin bricks.  They feel lighter too.

There's just enough room for the driver inside the truck cab.


The orange truck has an opening tailgate and opening doors.

The Four Storey Building.



Here's the first floor of the four storey building.  There's a large baseplate and the building sits on a raised foundation.  In the front, there's a covered porch that leads out onto a small tiled area.  Other features include a street light and a mailbox.  I don't really like the red street lamp, so I'll probably replace it later.  I should point out that the flowers attach really well to the plant stems.


One of things I don't like about Sluban is the smaller size doors.  Also, you have to cut away excess plastic from the window parts.  I left them on so you can see what they look like before I trim them off.  There is no glass for the window parts.  There's no interior details for any of the floors.

Here's the side view of the first floor.

Front view.

Overhead view.



Here's the second floor module.   The third and fourth floors are identical.

This is how the inside of each floor looks like.


The second floor can be easily removed from the first floor.


The rear view with two floors completed.

Third floor added.


A look around back.

 Side view after three floors completed.

Another view.


Fourth floor added.

This thing is tall!  side view.

Hey guys, Be careful, Don't fall off!

Finished the roof portion.  Here's the front.

The rear view of the roof top.


Here's the completed four storey building.


Last look.


This thing towers over my Hsanhe modulars for sure.

Thanks for looking at part one.   The review of the Sluban tower crane continues in part two here.